Control boards — Sliding gate and brushless operators

MC1

230V single-phase control board, for 1 leaf sliding gates with built-in receiver, memory for up to 215 different “Rolling Code” codes. It has other functions like soft stop and soft start, electronic force limiter.

View the manufacturer source ↗

MC410 | MC410STK

MC410 | MC410STK: Motorline range for control boards. Control board developed to work with 400Vac three-phase motors up to 1500W.

Control board developed to work with 400Vac three-phase motors up to 1500W. Ideal for application on STARK, KVM115 e KVM2020 motors:

Functions and technical details

• Standardization of Motorline® menus with the possibility of selecting the type of application (sectional or sliding gate)
• Possibility of adjusting the motor force
• Soft start adjustment (decreasing motor’s current at the start, reducing the impact on the mechanical parts and the motor)
• Phase failure detection
• Soft stop that allows decrease gate inertia when it reaches the limit switches
• Force regulation at the soft stop
• Manual or automatic course programming
• Output for RGB flashing lamp or door ́s status signal
• Equipped with emergency button, 2 pairs of photocells with different uses and limit switches
• Multifunction dry contact output with a maximum capacity of 7A.
• Ability to store up to 200 remote controls (100 complete opening and 100 pedestrian)
• Possibility of adjusting courtesy light time up to 99 minutes
• “Follow me” function – closing order 5 sec. after the photocell device is activated
• Maneuver counter
• Remote programming
• Human presence
• Pedestrian opening
• Electronic brake

View the manufacturer source ↗

MC50

The MC50 is a 230V single-phase electronic control board developed for the automation of sliding gates, sectional doors and barriers with 230V motors.

It is included in the BRAVO500, SLIDE800, OL1500 and OL2000 standard kits and in the KVM105 and KVM110 shaft attack motors.

With this new model, you only need to select the type of motor where it will be installed in the control board menu.

It has a built-in receiver, memory for up to 100 Rolling Code codes for total opening, plus 100 for pedestrian opening. It can also be applied to motors up to 1000W.

View the manufacturer source ↗

MC60

Control board developed to work with 1 motor of 24Vdc, with maximum power of 120W each. It also includes the following features:

Functions and technical details

• Technology that does not allow switching heating
• Effort detection
• Uniformization of the menus
• Battery polarity reverse protection
• Output for RGB flashing lamp or gate status
• Possibility to delete a specific remote control from memory
• Possibility of encoder connection
• Possibility to operate with limit switches or effort
• Inputs for 2 pairs of photocells with different functions, such as 2 sec. inversion, stop or inversion, opening button, closing button, pedestrian, rotary button (open and close) and limit switches
• “Follow me” function – closing order 5 sec. after the safety device detects the passage of an object / user
• Possibility of adjusting the courtesy light time
• Gate delay adjustment for opening and closing
• Total maneuver counter

View the manufacturer source ↗

MC91BL-SC

The MC91BL-SC is an electronic control board for controlling brushless motors with a built-in radio control system, developed for automating sliding gates.

The main features of the control board are:

Functions and technical details

• Emergency opening in case of power failure;
• Compatible with MMBL-BRAKE module for use in installations with steep slope;
• Compatible with MCONNECT LINK Wi-Fi module

View the manufacturer source ↗