ELBAC

SYT+ multipair cable with 3 twisted pairs and AWG24 copper conductors, PVC sheath and a stated impedance of 100 ohms. The datasheet describes pair identification using repeated colour marking. Selected packaging: 100 m box.

SYT+ multipair cable with 5 twisted pairs and AWG24 copper conductors, PVC sheath and a stated impedance of 100 ohms. The datasheet describes pair identification using repeated colour marking. Selected packaging: 100 m box.

SYT+ multipair cable with 3 twisted pairs and AWG20 copper conductors, PVC sheath and a stated impedance of 100 ohms. The datasheet describes pair identification using repeated colour marking. Selected packaging: 100 m box.

SYT+ multipair cable with 5 twisted pairs and AWG20 copper conductors, PVC sheath and a stated impedance of 100 ohms. The datasheet describes pair identification using repeated colour marking. Selected packaging: 100 m box.

SYT+ multipair cable with 3 twisted pairs and AWG24 copper conductors, LSZH sheath and a stated impedance of 100 ohms. The data sheet shows pair identification by repeated colours. The manufacturer states reaction-to-fire classification B2ca-s1a,d1,a1. Selected packaging: 100 m box.

SYT+ multipair cable with 5 twisted pairs and AWG24 copper conductors, LSZH sheath and a stated impedance of 100 ohms. The data sheet shows pair identification by repeated colours. The manufacturer states reaction-to-fire classification B2ca-s1a,d1,a1. Selected packaging: 100 m box.

SYT+ multipair cable with 3 twisted pairs and AWG20 copper conductors, LSZH sheath and a stated impedance of 100 ohms. The data sheet shows pair identification by repeated colours. The manufacturer states reaction-to-fire classification B2ca-s1a,d1,a1. Selected packaging: 100 m box.

SYT+ multipair cable with 5 twisted pairs and AWG20 copper conductors, LSZH sheath and a stated impedance of 100 ohms. The data sheet shows pair identification by repeated colours. The manufacturer states reaction-to-fire classification B2ca-s1a,d1,a1. Selected packaging: 100 m box.

RJ45 male Cat6 connector installed without a crimping tool. The manufacturer states compatibility with 6 to 9 mm cable sheaths and AWG26 to AWG22 conductors. Selected packaging: bag of 1 pcs.

RJ45 male Cat6A connector fitted without crimping tools, with reduced width for closely spaced sockets. According to the manufacturer, it accepts 6 to 9 mm jackets and AWG26 to AWG22 conductors. Selected packaging: bag of 1 pcs.

Shielded RJ45 female Cat6A module for network cable termination without a crimping tool. The datasheet specifies 6 to 9 mm sheaths and AWG26 to AWG22 conductors. Selected packaging: bag of 1 pcs.

Male RJ45 Cat6A connector with IP68 protection assembly, presented by ELBAC for outdoor network connections. The official image shows assembly parts and seals. Selected packaging: 1-piece bag.

Female RJ45 Cat6A jack with IP68 protection assembly, for outdoor network cable joints. The manufacturer shows the jack with its sealing and retaining parts. Selected packaging: 1-piece bag.

Coupler for directly connecting two FTP network cables. It avoids an intermediate joint through RJ45 male and female connectors and maintains a shielded connection. Selected packaging: bag of 1 pcs.

Panel-mount coupler with two female RJ45 sockets, stated as Cat6A IP68. The manufacturer specifies it for outdoor network connections; the mounting rings are shown in the official image. Selected packaging: bag of 1 pcs.

90° cable outlet accessory for the tool-free Cat6A male connector 942555-S0. The manufacturer describes several mounting orientations to adapt the outlet to the available passage. Selected packaging: bag of 1 pcs.

Category 6A U/FTP network cable, rated at 650 MHz, with SWB steel armour against rodents. The manufacturer specifies it particularly for outdoor runs and connections between IP devices. Selected packaging: 100 m wooden reel.

Category 5e unscreened network cable, with LSZH sheath and AWG24 copper conductors. The datasheet specifies an impedance of 100 ohms and indoor data connection use. Selected packaging: 100 m coil.

Category 5e network cable with overall shielding and LSZH sheath. The manufacturer states AWG24 copper conductors, 100-ohm impedance and dispenser supply for this packaging. Selected packaging: 305 m dispenser.

Category 6 U/UTP network cable with four AWG24 pairs and an LSZH sheath. The manufacturer states a B2ca-s1a,d1,a1 classification and presents this family for data and IP video surveillance installations. Selected packaging: 100 m cardboard reel.

Category 6 F/UTP network cable, with overall screen, LSZH jacket and 100-ohm impedance. It provides a copper link for data infrastructure, according to installation-specific lengths and connections. Selected packaging: 100 m wooden reel.

Category 6A U/FTP network cable, rated at 650 MHz, with individual pair shields and LSZH sheath. The manufacturer states B2ca-s1a,d1,a1 and presents it particularly for IP links in electrically disturbed environments and backbone cabling. Selected packaging: 100 m wooden reel.

Category 6A F/FTP network cable, rated at 650 MHz, with overall shielding and individual pair shields. Its LSZH sheath and 100-ohm impedance are described in the manufacturer's data sheet. Selected packaging: 100 m wooden reel.

Unscreened category 6 network cable, with an XL-LSZH jacket for indoor and outdoor routes. The manufacturer states rain and UV resistance and use with IP equipment. Selected packaging: 100 m cardboard reel.

Category 6A U/FTP network cable, rated at 650 MHz, for indoor and outdoor routes. The manufacturer presents it for outdoor IP equipment and links between switches. Selected packaging: 100 m wooden reel.

4-megapixel IP bullet camera with a fixed 2,8 mm lens. It operates on 12 V DC or PoE, with IP67 protection and stated infrared illumination up to 50 m. The datasheet specifies several video streams and detection functions; framing and night-time conditions remain to be checked.

4-megapixel bullet IP camera with 2,8–12 mm motorised autofocus lens for on-site framing adjustment. It is rated IP67 and powered by 12 V DC or PoE. Published consumption is below 12,5 W; the power port must be sized accordingly.

4-megapixel IP turret camera with fixed 2,8 mm focal length and white-light night illumination stated to reach 30 m. The data sheet describes night colour imaging, a 106° angle and 12 V or PoE supply. Actual results depend on lighting, settings and the scene.

4-megapixel IP mini dome with 2,8 mm lens, built-in microphone and detection functions. The datasheet states IP67 / IK10 and infrared illumination up to 20 m. Power can be supplied by 12 V DC or PoE; published night-time consumption remains below 5,5 W.

4-megapixel motorised mini-dome IP camera with ×4 optical zoom and horizontal/vertical positioning. It uses the included 12 V 2 A power supply or a 802.3at PoE+ port. Stated night-time consumption reaches 18,9 W: allow sufficient power per port and across the whole system.

4-megapixel IP camera dedicated to number plate recognition, with motorised 2,8–12 mm lens. ELBAC states resolution above 200 pixels per metre and software operation on an NVR with minimum firmware 1.4.4. Placement and software compatibility must be validated for the project.

Four-channel IP recorder with four PoE ports for direct camera connection. The data sheet states 48 W total PoE budget and 12 W maximum per port. It has one SATA bay, drive not supplied, and a supplied 48 V power unit; check each camera's required power.

Eight-channel IP recorder with eight PoE ports and HDMI/VGA outputs. The datasheet states a total PoE budget of 80 W and up to 30 W per port; both limits must be observed simultaneously. It accepts a SATA drive sold separately. The 48 V 2,5 A supply is included; bandwidth and functions depend on the cameras and require confirmation.

Sixteen-channel IP recorder for a network architecture with separate PoE switches. It has two Gigabit interfaces, two SATA bays and HDMI/VGA outputs. The sheet states 192 Mbps bandwidth and a 12 V 4 A power supply; disks and camera power must be included in system sizing.

1 TB video storage drive offered by ELBAC, designed for continuous operation in video surveillance systems. The official image shows a WD Purple of the same capacity. The brand and model actually supplied, and compatibility with the recorder, remain to be confirmed in the quotation.

2 TB video storage drive offered by ELBAC, designed for continuous operation in video surveillance systems. The official image shows a WD Purple of the same capacity. The brand and model actually supplied, and compatibility with the recorder, remain to be confirmed in the quotation.

4 TB video storage drive offered by ELBAC, designed for continuous operation in video surveillance systems. The official image shows a WD Purple of the same capacity. The brand and model actually supplied, and compatibility with the recorder, remain to be confirmed in the quotation.

Wall enclosure for distributing DC power to nine compatible camera circuits. Each output has protection and an indicator, with a stated limit of 1,1 A per output. Total current and voltage drop must be assessed across all wiring.

Mains power supply for a compatible 12 V DC camera, with an output capacity of 5 A. It has a DC connector with an internal diameter of 2,1 mm and a supplied mains lead. Device voltage, polarity and connector must be checked.

DIN-rail power supply offered in the ELBAC catalogue for industrial network equipment. Output is adjustable from 48 to 55 V DC, with a rated power of 240 W at 48 V. The official image identifies a MEAN WELL NDR-240-48 power supply.

Compact switch for a small IP camera network, with four powered ports and two Gigabit uplinks. The first port supports up to 60 W and the next three up to 30 W, within the overall budget. Its mains power supply is integrated.

Switch for connecting eight PoE+-powered IP devices, with a copper uplink and SFP slot for the network link. The shared budget is 120 W. The external 54 V power supply is included; optical module selection depends on the intended link.

L2 managed industrial switch for a cabinet or video aggregation point, with four Gigabit PoE+ ports and two SFP slots. Its housing mounts on DIN rail and operates on a separate DC supply. The documentation specifies an operating range of −40 to +75 °C.

Aggregation switch for an extensive video installation, with twenty-four PoE+ ports and four SFP slots configurable at 1 or 10 Gbit/s. It offers a 390 W budget, L3 network management and one-unit mounting in a 19-inch rack.

Injector for powering PoE+-compatible IP equipment over a Gigabit Ethernet link. It adds up to 30 W to a network cable and connects directly to mains power. Its enclosure supports wall mounting or grouping several injectors to organise a video installation.

Two-antenna kit for a wireless IP link between buildings where cable routing is difficult. The WI5815 family uses the 5 GHz band and a directional dish. Placement, alignment and power supply at both ends must be defined for the project.

Repeater for extending an Ethernet link and its PoE supply to a camera or other compatible device. It has one Gigabit input and one Gigabit output, with a IP66 enclosure. Residual power depends on length, PoE source and cables used.

Conversion kit for reusing an existing coaxial link or wire pair during migration to IP video. The two units carry network data and can transmit PoE power. Selection depends on the retained cable, distance and camera power requirements.

Video surveillance set combining an eight-channel recorder and four 4-megapixel WiFi cameras with a fixed 2,8 mm lens. The five power supplies are included. Wireless transmission carries data; every device still needs electrical power, and the recording disk must be provided separately.

Extension kit for viewing an HDMI display and using a keyboard and mouse remotely over an IP network. It includes two modules and two 12 V power supplies, with a local HDMI output. The network must be sized and organised for the transmission traffic.

Module for reading eight dry contacts and controlling eight relays over an IP network. It can be powered by PoE or a separate 12 V supply. Monitoring and control functions link equipment statuses to site operations.

Black wall enclosure for organising and locking away a recorder, switch or two-unit device with its compatible screen. It includes locks and a four-socket power strip. Compare its dimensions and mounting points with the equipment to be installed.

Distinguish the 12 V 5 A camera supply, the nine-output 12 V enclosure and the DIN-rail supply adjustable from 48 to 55 V. These power supplies are not interchangeable. Check voltage, polarity, per-output and total current, connections and receiving device. The 240 W rating is stated at 48 V; the nine-output enclosure is conservatively sized at 9 A pending confirmation of the documentation discrepancy.

Six product references from the ELBAC offering cover bullet, eyeball and dome formats, as well as PTZ and number plate reading. Choose lens, lighting and power according to the scene. Number plate recognition requires validated positioning and software compatibility.

Five connectors explicitly described as tool-free or requiring no crimping tool: Cat6/Cat6A male connectors, a shielded female module and IP68 versions. Conductors must still be prepared and cut according to the instructions.

Additional connections and installation accessory: inline wire coupler, panel coupler and elbow for connector 942555-S0. The sheets specify each item's function and the components to combine.

Network cable selection for indoor and outdoor routes, with several shielding constructions. Selected lengths and formats appear on each packaging data sheet.

Three NVRs and three drives from the ELBAC offering for recording system sizing. Selection depends on streams, channel count, PoE budget and desired retention. Drives sold separately; WD Purple photos do not guarantee the delivered brand or model.

Selection of eight cables with three or five twisted pairs, in PVC or LSZH according to reference. Each data sheet corresponds to an explicitly published 100 m box; versions and reaction-to-fire classifications remain distinct.

Additional selection of eight devices listed in the Featured Products, New Products or News sections of the ELBAC website when checked. It covers PoE injection, IP radio links, cable extension and migration, Wi-Fi kit, display extension, contact interfaces and enclosure integration. Uses, power supplies and accessories differ by product page; no sales ranking or launch date is inferred from this selection.

Compare four switches by ports, copper or fibre uplinks and network management. Shared budgets are specific to each model: 60 W selected for S40422-01-B0, 120 W for S40844-B0 and S45434-02-B0, 390 W for S42435-B0. The industrial switch requires a separate power supply; per-port maxima cannot be added without respecting the overall budget.