IZYX Systems offers locking equipment, power supplies and access control accessories. Selections include miniature, DIN rail and backup power supplies, plus exit pushbuttons and sensors, to prepare a coherent system for each door.
Selected installation and maintenance equipment with manufacturer specifications and documents. Indicative public prices excluding VAT: please contact us.
Battery-backed charger power supply in a lockable ABS enclosure, with 13,8V DC/3A output. Space is provided for one 7Ah battery, not supplied. Tamper contact, front-panel indicators and fuse protection; remote fault reporting is optional.
Battery-backed charger power supply in a lockable ABS enclosure, with 27,6V DC/2,5A output. The enclosure accommodates two 7Ah batteries, not supplied. Tamper contact, front-panel indicators and fuse protection; monitoring is optional.
TH35 DIN-rail switch-mode power supply, 1-module width, with 12V DC/1,5A output and 18W rating. Input: 200–240V AC/50–60Hz. HICCUP protection covers short-circuits, overloads and overvoltage, with automatic recovery after the fault clears.
TH35 DIN-rail switch-mode power supply, 1-module width, with 24V DC/0,75A output and 18W rating. Input: 200–240V AC/50–60Hz, with a green DC-output indicator and HICCUP output-fault protection.
3-module DIN-rail power supply with adjustable 12 to 14V DC output, 5A current and manufacturer-stated 60W rating. HICCUP protection and DC-output LED. Battery charging requires the optional CMD module stated as compatible by the manufacturer.
3-module DIN-rail power supply with adjustable 24 to 28V DC output, 2,5A current and manufacturer-stated 60W rating. The commercial designation mentions 27,6V DC. HICCUP protection, DC-output LED and stated compatibility with optional CMD charger modules.
INERGYX rechargeable VRLA AGM battery, 12V and 7Ah at 25°C at the 20H rate. UL94 V-0 flame-retardant ABS housing, FASTON F1 terminals and 151×65×94/100mm dimensions, with the latter height including the terminals. Charging voltage differs for float and cyclic service.
Momentary prewired stainless-steel push button with a blue 12V AC/DC halo and NO+NF contacts. 19mm mounting hole for a 1 to 10mm panel. The stated IP65 applies to the front face of the flush-mounted button; other supply voltages mentioned by the manufacturer are separate variants available on request.
Unmarked 80×80×1mm stainless-steel plate with a cut-out for a VIGIK/T25 reader head. The plate, SSH202 enclosure and reader remain separate references: their joint presentation does not establish a kit composition or a combined price.
82,5×82,5×48/52mm stainless-steel enclosure for an 80×80mm square plate. The manufacturer specifies enclosure fixings, tamper-resistant screws and the plate-mounting tool as supplied. Select the plate and reader separately.
Standalone access control combining a keypad and EM MARIN 125KHz reader for 999users. Metal housing and keys, two relays, programmable backlighting and alarm output. This S0 screw-terminal version is specified as IP64 in the exact manufacturer data-sheet column.
Front-resettable membrane release unit with three changeover contacts, configurable lights and buzzer. RCP305G 12–24V DC version, supplied with one cover, two keys and one seal. The manufacturer specifies IP42 and indoor use; this product alone does not establish installation compliance.
Symmetrical 20,5mm mortise electric strike, reversible for DIN right/left, electrically energised to unlock. The manufacturer states 3500N and integrated TVS protection. Continuous power is specified as possible at 12V DC; preload and current consumption depend on the selected supply.
Symmetrical 20,5mm mortise electric strike, reversible for DIN right/left, released when its 12V DC supply is removed. The manufacturer states 3500N holding resistance, 10N maximum preload and an integrated TVS diode.
400mm surface-mounted cable loop with zinc-plated steel conduit and reinforced-composite end fittings. Outside/inside diameters 12/9,5mm, with manufacturer-stated IP64 and IK08. This reference is not prewired and must not be confused with DLXT versions.
Chrome-plated recessed cable loop with a 260mm housing and 250mm spiral including end fittings. Inside diameter 10,4mm. Manufacturer documents differ on the 100°/160° angle and some dimensions: confirm the installation arrangement against the manual before selection.
Power-interruption timer with a powered output and adjustable 1 to 60second delay. Tables specific to TM200S specify 12–24V DC. A brief input interruption cuts the output for the set delay; do not treat it as the contact-triggered TM200.
Fail-safe surface-mounted electromagnetic lock with jumper-selected 12 or 24V DC supply, red/green LED and lock-status contact. L/Z brackets and the EH3-T template are selected separately to suit the installation.
Mortise electromagnetic lock in the 300kg range, rated by the manufacturer at 600lbs, powered at 12 or 24V DC and released when power is removed. The armature plate includes an anti-remanence ejector. The stated IP54 applies to the face of the recessed lock as specified in the manual.
35,5mm-wide mortise electromagnetic lock in the 300kg/600lbs range, fail-safe with a 12 or 24V DC supply. The armature includes an anti-remanence ejector. Dimensions differ with and without mounting plates; IP54 is limited to the face as specified in the manual.
References and contents come from manufacturer sources. Dated offers are identified separately; indicative public prices exclude VAT, and availability requires confirmation.
Emergency-exit locking set with a 24/48 V DC fail-safe electric strike, W1 faceplate and counterpart. DIN left version, manufacturer-stated holding force of 6000 N and two status contacts. Confirm door compatibility and installation requirements against the manufacturer manual.
Emergency-exit locking set with a 24/48 V DC fail-safe electric strike, W2 faceplate and counterpart. DIN left version, manufacturer-stated holding force of 6000 N and two status contacts. Confirm door compatibility and installation requirements against the manufacturer manual.
Emergency-exit locking set with a 24/48 V DC fail-safe electric strike, W1 faceplate and counterpart. DIN right version, manufacturer-stated holding force of 6000 N and two status contacts. Confirm door compatibility and installation requirements against the manufacturer manual.
Emergency-exit locking set with a 24/48 V DC fail-safe electric strike, W2 faceplate and counterpart. DIN right version, manufacturer-stated holding force of 6000 N and two status contacts. Confirm door compatibility and installation requirements against the manufacturer manual.
Fail-safe locking set with automatic 12–48 V DC adaptation. It includes the lock, armature plate and accessories for the documented mounting configurations: under the header, outward-opening door with L bracket or inward-opening door with ZL brackets. Door and lock status contacts, red/green LED and RAL 9006 cover. Product ratings and conformity do not replace verification of the complete installation.
Surface-mount assembly for the DBM1500EC lock. Two sets of plates are provided, with and without a Euro-profile cylinder opening. The lock is sold separately.
Adaptation to 9–12 mm glass, according to the current manufacturer page, for the DBM1500ECSH surface-mount assembly. Select the lock and surface-mount kit separately.
Adjustable Z mounting bracket assembly for EH3 electromagnetic locks. Lock and other mounting accessories sold separately.
Adjustable Z and L mounting-bracket set for EH3 electromagnetic locks. Lock sold separately.
Z and L mounting set for double EH3 electromagnetic locks. Confirm the installation configuration and accessories with the manufacturer; locks sold separately.
Top and bottom end caps for EMDH400C, EMDH600C, EMDH2500C and EMDH3000C electromagnetic-lock housings. Finishing accessory supplied without the housing.
U bracket for the armature plate of the 550 kg electromagnetic-lock range. For 10–13 mm glass; refer to the manufacturer page for door configurations. Lock sold separately.
Installation set with adjustable Z and L brackets for the 550 kg electromagnetic-lock range on an inward-opening flush door. Lock sold separately.
U armature-plate bracket for the 150 kg electromagnetic-lock range and 10–13 mm glass doors. Lock sold separately.
Adjustable Z and L installation set for the 150 kg electromagnetic-lock range. Verify door handing and compatibility against the documentation for the chosen lock. Lock sold separately.
Bracket set for surface mounting the EMSH2600 shear lock. The lock is sold separately.
Adaptation to 9–13 mm glass for the EMSH2600SH surface-mount assembly. Select the lock and surface-mount assembly separately.
Pair of metallised ABS end fittings with screws, for DL cable loops. Cable sleeve or complete cable loop not included.
Pair of metal end fittings with screws, for DLV cable loops. The current page specifies a zinc-alloy construction. Complete cable loop sold separately.
Galvanised-steel wall fixings for PSW and PSWB enclosures. Check the enclosure model and dimensions; enclosure sold separately.
Pole-mounting assembly for a maximum pole diameter of 200 mm and PSW or PSWB enclosures up to 600 mm wide. Enclosure sold separately.
Current references and products highlighted by the manufacturer. Presentation order is not a numerical sales ranking.
Specify the range or product reference you need: we will guide you to the appropriate documentation and options.
Product references, equipment and availability to be confirmed for your project.
