SIMU

Single-phase operator for industrial rolling doors, with torque of 250 Nm and speed of 8 rpm. The unit mounts at the shaft end. SIMU documents a dual emergency system comprising a short crank and integrated chain guide.

Three-phase operator for industrial rolling doors, with 430 Nm torque and 8 rpm speed. The unit mounts at the shaft end. SIMU documents dual emergency operation comprising a short crank and an integrated chain guide.

Three-phase operator with integrated electronics for industrial rolling doors, with torque of 300 Nm and speed of 12 rpm. The unit mounts at the shaft end. SIMU documents a dual emergency system comprising a short crank and integrated chain guide.

Three-phase tubular motor for a grille or roller shutter in an industrial or commercial building. The selected T9M version delivers 400 Nm at 8 rpm. It includes emergency manual operation; installation depends on the tube, curtain and planned adapters.

Three-phase tubular motor for a grille or roller shutter in an industrial or commercial building. The selected T9M version delivers 800 Nm at 8 rpm. It includes emergency manual operation; installation depends on the tube, curtain and planned adapters.

Single-phase tubular operator for industrial and commercial grilles or roller shutters. This T8M version delivers 150 Nm at 8 rpm. The mechanism fits inside the winding tube and includes manual emergency operation to retain control without power.

Single-phase tubular operator for industrial and commercial grilles or roller shutters. This T8M version delivers 250 Nm at 8 rpm. The mechanism fits inside the winding tube and includes manual emergency operation to retain control without power.

Single-phase tubular operator for industrial and commercial grilles or roller shutters. This T8M version delivers 450 Nm at 8 rpm. The mechanism fits inside the winding tube and includes manual emergency operation to retain control without power.

Wired central rolling shutter motor with integrated brake and 230 V supply. The CENTRIS S variant delivers 60 Nm at 10 rpm, for a 60 mm shaft and 200 mm crown. Closure characteristics determine the adaptations required.

Wired central operator for rolling shutters, with integrated brake and 230 V supply. The CENTRIS M variant delivers 75 Nm at 10 rpm, for a 60 mm shaft and 200 mm crown. Closure specifications determine the required adapters.

Wired central motor for metal shutters, with integrated brake and 230 V power supply. The CENTRIS L variant delivers 100 Nm at 10 rpm, for a 60 mm shaft and 200 mm crown. Closure characteristics determine the required adaptations.

Wired central motor for metal shutters, with integrated brake and 230 V power supply. The CENTRIS XXL variant delivers 200 Nm at 10 rpm, for a 76 mm shaft and 240 mm crown. Closure characteristics determine the required adaptations.

Four-channel handheld remote control for SIMU equipment associated with garage doors, shop grilles and industrial building closures. It has a metal loop and mounting bracket for use on a sun visor or wall storage.

Single-channel BHz radio wall control for compatible motors and receivers. Provides local shutter or group control. The white enclosure measures 80 × 80 mm and is ten millimetres thick according to the SIMU data sheet.

Single-channel handheld remote control for BHz radio motors and receivers. Uses a 3 V CR2032 lithium battery. The manufacturer presents it for local control, with a 125 × 40 × 15 mm enclosure.

Five-channel handheld remote control for BHz range motors and receivers. This version provides several commands from one portable transmitter. Uses a CR2032 lithium battery at 3 V and communicates in the 868–870 MHz radio band.

Single-channel Hz radio wall control for individual control of a shutter or compatible group. The favourite-position function recalls a stored setting using the stop button. This model is the wall-mounted version of the Hz control collection.

Handheld control for five shutters or groups equipped with Hz operators. A master channel centralises the five stored channels. The LCD identifies each channel with two characters; an indicator shows low battery level.

Single-channel programmable remote control to centralise and automate compatible Hz roller shutters. It provides daily opening and closing, with manual or automatic use. Programming can distinguish working days and rest days; a wall holder is supplied.

Remote radio receiver for adding Hz control to a wired roller shutter motor. Retains use of the existing local reversing switch. Its size allows integration behind the switch in the electrical box, with a recommended minimum depth of fifty millimetres.

Photovoltaic panel for the AUTOSUN solar system, converting light into electrical energy. This version has mounting holes and measures 470 × 60 × 6 mm. It can be fitted on the headbox or suitable angled brackets.

AUTOSUN system battery with protective aluminium casing and thirty-centimetre cable. It stores energy from the photovoltaic panel to power the operator on 12 V DC. Its casing mounts on brackets with a clip-on/clip-off mechanism.

Battery without protective casing, intended for installation inside the roller shutter box. It has a twenty-five-centimetre cable and a 12 V DC supply. Specific brackets with elastic straps secure this bare version.

One-metre extension for relocating the solar panel to a brighter position. The cable gland suits a sixteen-millimetre hole. SIMU specifies that the cable must be protected from ultraviolet light and must not be shortened.

Brackets for securing a bare 23 mm diameter battery inside the roller shutter box. The battery clips into the loops and an elastic strap provides additional retention. Brackets are riveted; published packaging contains twenty pairs.

Angled accessories for mounting the perforated SIMU solar panel. They complete installation of the photovoltaic system on the shutter box or masonry, according to the chosen configuration. Selection must match the panel model intended for this mounting.

Mechanical interface for using 50 mm diameter motor adaptors with 40 mm diameter motors. Complements roller shutter or blind adaptor sets. Tube geometry and motor installation determine the components to combine.

Adapter set for a 60 mm octagonal Simbac tube, comprising drive wheel 9781001 and crown 9707025. The manufacturer states a maximum torque of 50 Nm. This kit provides the mechanical connection between the compatible motor and winding tube.

Motor head bracket for roller shutter installations in window-integrated or renovation headboxes. The SIMU page mentions several headbox configurations and a maximum torque of 35 Nm. The headbox reference and available mounting help prepare bracket selection.

Control tool for setting roller shutter motor limits. SIMU presents it for wired and radio operators, with or without electronics. This setting switch replaces former product reference 2006024 in the manufacturer's documentation.

Control enclosure for SIMU T9 and non-EI SIMUBOX three-phase motors for industrial rolling doors. It provides hold-to-run or mixed control where the installation permits, with a safety brake connection. The manufacturer states a maximum motor power of 1 300 W and a IP44 enclosure.

Control panel for three-phase motors driving shutters, metal grilles and sectional doors. Four modes are provided: hold-to-run, mixed, impulse and automatic. Removable terminal blocks and dedicated inputs allow connection of safety equipment and peripherals suited to the configuration.