Motorline · Control Boards

MC415

Control board with a built-in inverter for high-speed doors, sectional doors and sliding gates. It uses a touchscreen interface; select the version suited to the motor.

All Motorline products Request a price

Indicative public prices excl. VAT

Price on request

Indicative public prices excl. VAT — Please contact us to confirm price, availability and configuration.

Please contact us Request a call back

Motorline MC415 — Official image of the product or its range. Confirm the model and accessories in the quotation.

Specifications and model selection

Output for flashing lamp: 230Vac
Motor output: 3*230Vac 2300W Máx.
Output for auxiliary accessories: 24Vdc 4,8W Max.
Output for Safety Devices and Push Button: 24Vdc 4,8W Max.
Operating temperature: -25°C to 55°C
Built-in radio receiver: 433,92 Mhz
Compatible remote controls: 12bits or Rolling Code
Maximum Memory Capacity: 100 (full opening), 100 (pedestrian opening), 200 (totals)

Documented references and models

MC415

Check dimensions, power supply, operating frequency and accessories for your installation; this page does not confirm compatibility.

Understand the product and prepare your project

The MC415 electronic control board with built-in inverter has been specially designed to automate sectional and rapid doors, sliding gates.

It combines functionality with an intuitive touch interface that simplifies system configuration, diagnostics, and monitoring.

Receiver on the 433.92 MHz frequency, with capacity for up to 200 transmitters.

With a built-in inverter and interactive touch screen, it allows precise control and continuous monitoring of all safety devices — such as photocells, safety edges, and obstacle detection systems — ensuring immediate response to any system anomaly.

Functions and technical details

Mode 1: up to 200 total opening transmitters
Mode 2: up to 100 total opening transmitters and 100 pedestrian opening transmitters
Absolute: allows immediate adjustment without manual readjustments;
Quadrature: replaces working time with pulse counting.
Interlock Function: Blocks the movement of other doors simultaneously;
Master/Slave Function: Allows simultaneous control of a second unit from the main one.
Touch Display
Buttons for external control: Opening Stop Closing
Connector for MM90-RGB module
Connector for MCONNECT LINK module
Connector for MMR15 receiver module
Connector for MM415COM-RS485 module
RF module connector
Memory connector
Brake resistor connector
Antenna connector
Relay connector for multifunction outputs
Connector for crank sensor
Connector for auxiliary accessories 24 Vdc | 4.8W max.
Photocell connector 24 Vdc | 4.2W max.
Connector for emergency device (e.g. motor thermal or current sensor)
Connector for absolute encoder 12Vdc | 1.2W max.
Safety edge connector
Limit switches connector

Control board power	230Vac 50Hz
Output for flashing lamp	230Vac
Motor output	3*230Vac 2300W Máx.
Output for auxiliary accessories	24Vdc 4,8W Max.
Output for Safety Devices and Push Button	24Vdc 4,8W Max.
Operating temperature	-25°C to 55°C
Built-in radio receiver	433,92 Mhz
Compatible remote controls	12bits or Rolling Code
Maximum Memory Capacity	100 (full opening), 100 (pedestrian opening), 200 (totals)
Fuse F1	16A 250V (slow action)
Fuse F2	1A 250V (slow action)
Touchscreen for gate programming and status display	Yes