EVOLOOP
EVOLOOP · Preferred detection option
Indicative public prices excl. VAT
Price on request
Indicative public prices excl. VAT — Please contact us to confirm price, availability and configuration.
Range illustration. Exact variant to be confirmed in the quotation.
EVOLOOP
FMCW activation and presence radar for barriers. Three configurable virtual zones, up to 7 m and 140° according to the manufacturer. Level D complements level C force limitation.
EVOLOOP reference
FMCW activation and presence radar for barriers. Three configurable virtual zones, up to 7 m and 140° according to the manufacturer. Level D complements level C force limitation.
- BEA Sensors manufacturer page ↗ · Product
- Original manufacturer's documentation ↗ · Range with identified reference
- Original manufacturer's documentation ↗ · Range with identified reference
- Original manufacturer's documentation ↗ · Range with identified reference
Product references and versions should be confirmed in the linked documentation.
Barrier detection to configure for your site.
EVOLOOP is BEA's radar for opening, presence and protection at automatic barriers. Its virtual loops replace the in-ground inductive loop and are configured for site traffic. Control Access helps you choose placement, interfaces and the configuration to be quoted.
Benefits for your installation
- Reduce road surface work — An alternative to buried induction loops for upgrading barrier detection without installing a loop in the ground.
- Adapt detection to the passage — Up to three virtual zones can be adjusted separately according to loop type, target and traffic direction.
- Simplify setup and monitoring — The EVOLOOP app supports learning and allows loop visualisation, parameter adjustment and access to diagnostics.
- Link detection to other equipment — Presence signals can control a barrier or trigger external ticketing and number plate recognition equipment.
Applications
- Car parks equipped with automatic barriers.
- Paid access and toll barriers.
- Vehicle access control with activation, presence and barrier protection to be configured.
Technical information
| Specification | Manufacturer data |
|---|---|
| Technology | FMCW radar, MoWa Inside; 60 GHz microwave. |
| Virtual loops | Up to 3 independently configurable loops. |
| Stated maximum detection field | Up to 7 m, depending on application and setting. |
| Radar field of view | 140° opening; 40° elevation. |
| Mounting height | Between 30 and 70 cm above the ground; position the detector as low as possible within this range. |
| Antenna orientation | Adjustment from −20° to +20°. |
| Power | 12 to 30 V DC ±10% or 12 to 24 V AC ±10%. |
| Maximum consumption | Below 3 W. |
| Interfaces | Two electronic relays and one relay; optocoupled test input. |
| Response time | Typical 100 ms; maximum 250 ms. |
| Enclosure protection | IP65 according to IEC/EN 60529. |
| Temperature and humidity | −25 °C to +55 °C; maximum +50 °C with AC supply. Relative humidity from 0 to 95%, non-condensing. |
| Dimensions | 50 × 150 × 68 mm. |
| Configuration and cable | EVOLOOP mobile app via Bluetooth; standard 3 m cable. |
Values and conditions published by BEA. BEA instructions p. 15 ↗ · BEA data sheet p. 2 ↗
Installation and protection conditions
Additional type D protection — BEA describes a level D protection function according to EN 12453. It must complement a system providing level C barrier force limitation; EVOLOOP alone does not guarantee installation compliance. BEA manual p. 2 ↗
Position and coverage to be defined on site — For protection, the instructions require positioning no more than 50 cm from the boom. The field must cover the barrier length and be adjusted for protection on one or both sides. BEA instructions p. 2 ↗
Commissioning and tests — Installation and commissioning are reserved for a trained specialist. The device's test input and checks must follow the manual; it specifies a test before every movement and, if the test input is not used, a check at least every six months. BEA manual p. 2 ↗
Power supply and environment — Provide a supply ensuring the double insulation required by BEA. Keep the front clear, avoid metal parts in its immediate vicinity and keep the surface clean; do not clean directly with high-pressure equipment. BEA instructions p. 4 ↗
Official BEA documents
- Official BEA product page — EVOLOOP ↗
- BEA commercial datasheet — French, 2-page PDF ↗
- BEA instructions — French, 16-page PDF ↗
- BEA technical specifications ↗
- BEA installation and videos ↗
Equipping a car park or barrier entrance in Marseille or PACA? Send us the barrier type, passage width, expected traffic flows and available supply to prepare your quotation.
EVOLOOP — Manufacturer documents
Manufacturer documents remain in their original language.